/****************************************************************************** Copyright (c) 2009 Infineon Technologies AG Am Campeon 1-12; 81726 Munich, Germany For licensing information, see the file 'LICENSE' in the root folder of this software module. ******************************************************************************/ #ifndef _DSL_CPE_DEBUG_DANUBE_H #define _DSL_CPE_DEBUG_DANUBE_H #define DSL_CPE_IFX_LOW_DEV "/dev/ifx_mei" typedef struct { /* device file descriptor */ DSL_int_t arrDeviceFd; } DSL_DANUBE_TcpDebugInfo_t; typedef struct { DSL_uint32_t nAddress; DSL_uint32_t nReadCount; DSL_uint32_t buffer[20]; } DSL_CPE_DANUBE_ReadDebug_Parameter_t; typedef struct { DSL_uint32_t nAddress; DSL_uint32_t nData; } DSL_CPE_DANUBE_Parameter_t; typedef struct { DSL_uint16_t nFunction; DSL_uint16_t nGroup; DSL_uint16_t nAddress; DSL_uint16_t nIndex; DSL_uint16_t payload[12]; } DSL_CPE_DANUBE_Message_t; #define DSL_CPE_BYTE_SIZE (1 << 14) #define DSL_CPE_DWORD_SIZE (2 << 14) #define DSL_CPE_WORD_SIZE (0 << 14) #define DSL_CPE_MSG_RECV_LENGTH (32) #define DSL_CPE_DCE_COMMAND (0x1000) #define DSL_CPE_MP_FLAG_REPLY (1) /* Host-to-DCE */ #define H2DCE_DEBUG_RESET (0x02) #define H2DCE_DEBUG_REBOOT (0x04) #define H2DCE_DEBUG_READ_MEI (0x06) #define H2DCE_DEBUG_WRITE_MEI (0x08) #define H2DCE_DEBUG_DOWNLOAD (0x0A) #define H2DCE_DEBUG_RUN (0x0C) #define H2DCE_DEBUG_HALT (0x0E) #define H2DCE_DEBUG_REMOTE (0x10) #define H2DCE_DEBUG_READBUF (0x12) #define H2DCE_DEBUG_READDEBUG (0x14) #define H2DCE_DEBUG_DESCRIPTORSET (0x16) #define H2DCE_DEBUG_DESCRIPTORSTAT (0x18) #define H2DCE_DEBUG_DESCRIPTORLOG (0x1A) #define H2DCE_DEBUG_DESCRIPTORCLEAR (0x1C) #define H2DCE_DEBUG_DESCRIPTORREAD (0x1E) /* DCE-to-Host */ #define DCE2H_DEBUG_RESET_ACK (0x03) #define DCE2H_DEBUG_REBOOT_ACK (0x05) #define DCE2H_DEBUG_READ_MEI_REPLY (0x07) #define DCE2H_DEBUG_WRITE_MEI_REPLY (0x09) #define DCE2H_ERROR_OPCODE_UNKNOWN (0x0B) #define DCE2H_ERROR_ADDR_UNKNOWN (0x0D) #define D2DCE_DEBUG_READBUF_ACK (0x13) #define H2DCE_DEBUG_READDEBUG_ACK (0x15) #define DCE2H_DEBUG_HALT_ACK (0x0F) #define DCE2H_ERROR_DMA (0x34) /******************************************************************************************************** * DSL CPE API Driver Stack Interface Definitions * *****************************************************************************************************/ /** IOCTL codes for bsp driver */ #define DSL_IOC_MEI_BSP_MAGIC 's' #define NEW_MP_PAYLOAD_SIZE 12 #define DSL_FIO_BSP_DSL_START _IO (DSL_IOC_MEI_BSP_MAGIC, 0) #define DSL_FIO_BSP_RUN _IO (DSL_IOC_MEI_BSP_MAGIC, 1) #define DSL_FIO_BSP_FREE_RESOURCE _IO (DSL_IOC_MEI_BSP_MAGIC, 2) #define DSL_FIO_BSP_RESET _IO (DSL_IOC_MEI_BSP_MAGIC, 3) #define DSL_FIO_BSP_REBOOT _IO (DSL_IOC_MEI_BSP_MAGIC, 4) #define DSL_FIO_BSP_HALT _IO (DSL_IOC_MEI_BSP_MAGIC, 5) #define DSL_FIO_BSP_BOOTDOWNLOAD _IO (DSL_IOC_MEI_BSP_MAGIC, 6) #define DSL_FIO_BSP_JTAG_ENABLE _IO (DSL_IOC_MEI_BSP_MAGIC, 7) #define DSL_FIO_FREE_RESOURCE _IO (DSL_IOC_MEI_BSP_MAGIC, 8) #define DSL_FIO_ARC_MUX_TEST _IO (DSL_IOC_MEI_BSP_MAGIC, 9) #define DSL_FIO_BSP_REMOTE _IOW (DSL_IOC_MEI_BSP_MAGIC, 10, DSL_uint32_t) #define DSL_FIO_BSP_GET_BASE_ADDRESS _IOR (DSL_IOC_MEI_BSP_MAGIC, 11, DSL_uint32_t) /*#define DSL_FIO_BSP_IS_MODEM_READY _IOR (DSL_IOC_MEI_BSP_MAGIC, 12, u32) #define DSL_FIO_BSP_GET_VERSION _IOR (DSL_IOC_MEI_BSP_MAGIC, 13, DSL_DEV_Version_t)*/ #define DSL_FIO_BSP_CMV_WINHOST _IOWR(DSL_IOC_MEI_BSP_MAGIC, 14, \ DSL_CPE_DANUBE_Message_t) #define DSL_FIO_BSP_CMV_READ _IOWR(DSL_IOC_MEI_BSP_MAGIC, 15, \ DSL_CPE_DANUBE_Parameter_t) #define DSL_FIO_BSP_CMV_WRITE _IOW (DSL_IOC_MEI_BSP_MAGIC, 16, \ DSL_CPE_DANUBE_Parameter_t) #define DSL_FIO_BSP_DEBUG_READ _IOWR(DSL_IOC_MEI_BSP_MAGIC, 17, \ DSL_CPE_DANUBE_ReadDebug_Parameter_t) #define DSL_FIO_BSP_DEBUG_WRITE _IOWR(DSL_IOC_MEI_BSP_MAGIC, 18, \ DSL_CPE_DANUBE_ReadDebug_Parameter_t) #if (defined(INCLUDE_DSL_CPE_CLI_SUPPORT) && !defined(DSL_CPE_DEBUG_DISABLE)) || defined(DSL_DEBUG_TOOL_INTERFACE) DSL_int_t DSL_CPE_DEV_DeviceOpen(DSL_char_t *pDevName, DSL_uint32_t dev_num); #endif /* #if (defined(INCLUDE_DSL_CPE_CLI_SUPPORT) && !defined(DSL_CPE_DEBUG_DISABLE)) || defined(DSL_DEBUG_TOOL_INTERFACE)*/ #endif /* _DSL_CPE_DEBUG_DANUBE_H */